Payment & Shipping Terms:
|Material:||Brass/Aluminum||Finish Color:||Satin/or Customize|
|Types:||Single Sided||Size:||Φ16*27mm/or Customize|
|Application:||Support For Panels,Dispalys,Shelves,Signages Etc.||Others:||OEM/ODM|
t bar clips,
hanging system clamp
Side Clamp Gripper Cable Display Components , Brass Material Cable Clamps For Panels
The Side Clamp Grippers clamp material ≤4mm and is typically used with vertical signage or panels.
1. Attach a clamp support to each corner of the glass shelf at 3/4"-1" distance from edge
2. Mark cable positions on floor area - Lay shelves on floor and mark cable positions,
or use measurements. With the use of a plumb line, mark and fix cables to ceiling
(ensuring that fixings are secure).
3. Install cables.
4. Shelf fitting - As a guideline; the lowest shelf should be fixed approx. 24" from the floor,
and subsequent shelves approx 12" apart.
5. Affix shelf to cables. Adjust shelf to a horizontal position; preferably with a spirit level.
6. For proper and easier installation it will require two people.
This is an edge clamp designed for use with wire cable displays,
Holds (2) panels side by side for larger displays,hold sign panel up to 4mm thick
It can be made of aluminium or brass material with satin silver finish,
Use screw to tighten clamp and holds panel securely.
Create a delicate, almost invisible presentation of shelving on thin gauge cable using the Side Clamp, Swiveling to hold shelving at any angle, it is one of our most flexible and useful shelving clamps.
Our side clamps are made from finely machined aluminum/brass with a very fine brushed surface.
Then these are finished in a clear anodized surface to maintain these attributes for years.
We think these are the best side clamps available on any continent.
|3. Hangs Material||Vertically|
|4. Finishing Color||Satin(Silver)|
The Vertical side clamp is perfect for hanging art, signs, banners, foam-board,
plexiglass and acrylic pocket displays.
|6. Safe Working Load||20KG,depends on the cable diamter work with|
If hanging displays between two vertical cables, you'll only need single-sided clamps (4 required per panel, 2 on each side). If you are using three vertical cables, the double-sided clamps can fit onto the middle cable and the single-sided clamps can be used on the outer cables. This saves on the number of parts required.
Our Cable hanging system are perfect for all your indoor applications.
The elegant finishes that we carry will give your display a unique look that will
make it stand out like no other!Thanks to the easy installation process you can
have an exhibit displayed anywhere you would like in no time!
We offer the side Clamps in different sizes,which are compatible with panels of different thickness.
You can send us the drawing for OEM as well.
Contact Person: Millie Zhou