Payment & Shipping Terms:
|Cable Gripper Material:||Zinc Alloy||Color:||Nickel,or Customize|
|Wire Thickness:||Ø2.0mm||Main Cable Length:||2000mm,or Customize|
|Wire Material:||304 Stainless Steel Wire||Application:||To Hang Panel Lights,Linear Lights,LED Sign,Billboard Etc|
Adjustable LED Panel Suspension Kit Mounting Hardware for LED Panels and Linear Fixtures
This is a kit contains an adjustable cable loop device used to suspend signage,
lighting systems, decorations, large mobiles and fixtures such as shop window displays.
Kit contains 1 x loop makers ,1 x 2m 2.0mm steel cable +
2 x 500mm 2.0mm Y cables with spring loaded hooks.
1. Material:Zinc Alloy+Stainless Steel Wire
2. Size:Same as the drawing
3. Cable Diameter and Length:Ø2.0*2000mm;Or Customize
Y cable:Ø2.0*500mm each side
4. Finishing Color:Nickel;Or Customize
5. Application: Hang items from beams, trusses, pipes and trunking
6. Safe Working Load:30KG(Fore reference only)
One Zinc Alloy Loop Maker ,adjust the cable length;
Two Hooks pressed on the end of Y cable
One 304 Stainless Steel wire with diecast end
LOOP MAKER GRIPPER
L:78.8″ – (2000MM)
IMPORTANT: It is essential to check that the top ceiling fixings are strong enough to take the
weight of the items being displayed, while allowing for the tension in the cables.
The LED Panels can be suspended or surfaced mounted,
Stainless steel wire suspension kit for use with LED Panels,
and many other ultra slim LED panel lights allowing the panel to be hung from a ceiling.
Ideal for situations when recessed mounting is not possible, or for an ultra modern appearance.
This suspension kit is designed for the LED panels with dimensions
of 600mm x 600mm and 625mm x 625mm.
The 3000mm steel cable is adjustable in height and allows for
widest variety when suspending LED panels from ceilings.
Stainless steel wire suspension kits for use with LED Panels and many other products,
Allow the panel to be hung from a ceiling. Ideal for situations when recessed mounting
is not possible, or for an ultra modern appearance.
What components do I need to hang my fixtures?
You will need a ceiling attachment (cable coupler or connector), a cable with a terminal (stop sleeve) and a Cable Gripper, normally placed at the fixture. You may also need ceiling canopies and power cord.
What type of cable do I need?
The cable has to be 7x7 or 7x19 stranded aircraft cable in stainless or galvanized steel.
Cables should have factory installed terminals (stop-sleeves). The cable diameter depends
of the weight of the fixture.
What’s the difference between Galvanized and Stainless cable?
Both Stainless Steel and Galvanized Aircraft Cable have approximately the same break strength. Galvanized cable is less expensive and is used in 90% of all lighting applications.
Cable loops make installation quick and easy
By creating an adjustable loop in a suspension cable with small hook at the other end of the wire
it is easy to suspend items from beams, roof trusses, pipework, trunking or Unistrut -
and heights can be infinitely adjusted.