Payment & Shipping Terms:
|Cable Gripper Material:||Brass||Color:||Chrome,or Customize|
|Wire Thickness:||Ø1.2mm||Main Cable Length:||1500mm,or Customize|
|Wire Material:||304 Stainless Steel Wire With||Application:||To Hang Panel Lights,Aquarium Light ,Aluminium Profiles Etc|
aquarium light hanging kit,
wire suspension hanging kit
Adjustable Ceiling LED Panel Suspension Kit For Linear Light / Profile Hnaging Kit
We Have Wire Suspension Kits which allow you to fit LED panels to any flat surface, ceiling, or wall.
Give Yourself The Benefits of LED Panel lighting Anywhere. A simple solution which compliments our panels and allows you to make a very neat and clean lighting solution.
L:59″ – (1500MM)
|Size:Ø12mm * 25mm||
Size:Ø9mm * 13mm
1. Material:Brass+Stainless Steel Wire
2. Size:Same as the drawing
3. Cable Diameter and Length:Ø1.2*1500mm;Or Customize
4. Finishing Color:Chrome;Or Customize
Our suspension Cable Kits make setting up your perfect system that much easier.
Find the right kit for you, then simply add your Cable Supports and get ready to be amazed!
The elegant finishes that we carry will give your display a unique look that will make
it stand out like no other.
Suspension kits with adjustable gripper and Stainless Steel Wire,
Can be used to hang Linear Lights,LED Panels and many other products,
Offer the perfect solution for the suspension of the fixtures.
· Complementary, aesthetic design
· Easy, one-handed 'squeeze' adjustment up-or-down
· The ceiling ﬁxing must be installed correctly and by a qualiﬁed ﬁtter into a reliable
material to achieve the working load
· Make sure to use a reliable and secure ﬁxing for the object being suspended
· Not to be used outside
· Make sure the wire has no defects before use. Use only for static loads
· A minimum of two suspensions are recommended per item being suspended
· Always remove or support the load before making any adjustments
Stainless steel wire suspension kits for use with LED Panels and many other products,
Allow the panel to be hung from a ceiling. Ideal for situations when recessed mounting
is not possible, or for an ultra modern appearance.
Installing your display is as easy as ever with the Self-Gripping Ceiling Fastener!
You can use the Ceiling Fastener to mount your cable to the ceiling or floor or use it as
a mount below your shelving.
After you mark your installation location, install your anchors if needed, then simply
secure the Ceiling Fastener down with a screw through each of the 3 holes in the base.
To install your cable, just push the button down on the top of the Ceiling Fastener
and release in the desired location!
Acoustics, Display, Exhibition, Room divider, Decoration…
Everything that hangs from the ceiling or the wall should use the Suspension Systems.
If you have a project that involves unusually sloped, curved or high ceilings, our aircraft
cable gripper system may be the solution for you. It is affordable, flexible and easy to install.
To find out more about this more solutions for your hanging system,
Please feel free to contact our sales team.
Contact Person: Ms. Shana Chen
Tel: 86 18688885542